View Full Version : ~Sold~93 Mustang GT hatchback
red93hatch
03-02-2005, 08:08 PM
Ok well First off I dont have any pictures BUT some of you may know what car it is, Its two tone Teal/Turqouis sp? top with a grey bottom with American racing charcoal 5 star type wheels.It has over 100k miles on it but it runs awsome.This is my dads car and if you havent seen it, it sits at motorcare which is where my brother works and he drives it to work. My dad is asking 4,000 obo. BUT thats with the Weld racing draglights on it if you want he would prob. take 3,500 with the American Racing wheels. It is bone stock it has a 5.0 302 5spd in it. Also unlike most mustangs the Iner fenderwells are not all crinkled. We are the 3rd owner of this car and the car had never been drivin in the rain or snow until this past fall/winter once we got it. If you have any ?s pm me or post.
where is motorcare?
im assuming mtta..
wouldnt mind takin a look at it
red93hatch
03-02-2005, 08:41 PM
ok umm you know where burgerking is in mtta is so its right beside midas which is right beside bk. and Motorcare has a tilted sign. hope that you can make sense of that lol.
the place where Mark works?
xjoewhitex
03-02-2005, 09:15 PM
the place where Mark works?exact place where mark works... 8)
xjoewhitex
03-02-2005, 10:21 PM
please stick to the rules guys... If your not buying, selling or helping don't post :wtf:
8.) Absolutely NO Off-Topic discussions, NO Debates or Negativity will be tolerated in these threads!!! Only questions related directly to the product being sold will be accepted... Any Others will be Deleted
red93hatch
03-03-2005, 02:33 PM
^^^ I think I misseed something lol. anyways.... yeah jay as joe said it is the exact place were mark works. 8)
how long has your dad had it?
it looks identicle to one my buddy used to have a long time ago
he sold it to some dood in mtta, but it had a vortec on it when he got rid of it
red93hatch
03-03-2005, 04:07 PM
I would say about along the lines of 4 or 5 months not real long but I dont know if its the same car or not but my dad bought it off of Kirk Isner I thinks thats how you spell it anyways it used to sit in williamstown at the tanning place alot. His wife or girlfriend used to drive it.
red93hatch
03-13-2005, 07:30 PM
Well My dad thought it had the car sold then the dumb kid he was holding it for came over and brought some Expert :WINK: who thought he new stuff about mustangs and started picking apart and said that it needs door hinge pins and that they dont sell them any more and that you would have to pull the whole engine and tranny to fix a Oil leak it has which is from the oil pan seal. And a bunch of other dumb tarded stuff like that but anyways..... its still for sale for 4,000 obo.
Well My dad thought it had the car sold then the dumb kid he was holding it for came over and brought some Expert :WINK: who thought he new stuff about mustangs and started picking apart and said that it needs door hinge pins and that they dont sell them any more and that you would have to pull the whole engine and tranny to fix a Oil leak it has which is from the oil pan seal. And a bunch of other dumb tarded stuff like that but anyways..... its still for sale for 4,000 obo.
door pins are a pain in those cars.. and if theyre shot, replacement ones wont work, i had bushings turned on a lathe oversized an had to drill out the hole to clean it up a bit an fit the new bushing. also the old ones are a pain to get out cause theyre mushroomed..
if the rear main is leaking, you would have a big hassle..
red93hatch
03-13-2005, 09:29 PM
Yeah but wouldn't S-10 pins work? they're not shot in my dads car but the guy was just trying to get it for way less then what its worth but I dont. Well yeah but the rear mains not leaking and he said it was and he was basically a real ASH about everything and I dont know I mean half the things he said were wrong werent wrong. Also I dont know alot of stuff about stangs but IF the rear main was leaking couldnt you just take the tranny out I dont know just wondering as i am trying to learn more anyways better get back on topic. lol :)
yep yep, super-10 pins work as long as the holes arent wallered..
if the rear main was leaking, it'd be losing oil an itd be leaking, if it is leaking odds are the valve covers need torqued on.. for some odd reason they have a bad habit of comin loose on a 5.0
id say the guy was just tryin to make up stuf to jew you on price.. put it in the buliten, fox body's are easy to sell around here. I sold 3 last year in the 1st week they were in the buliten
Don juan futon
03-13-2005, 09:32 PM
Thread deleted in 5.......4......3.......2.....
Thread deleted in 5.......4......3.......2.....
ahahahaha
even tho were helping the guy out
red93hatch
03-17-2005, 02:42 PM
Its finally gone some guy stopped by my brothers work and decided he wanted to have it lol.
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.