View Full Version : Getting my car tuned this friday !!
Naste95
03-28-2005, 04:30 PM
Taking the car down to Delk Preformance friday. I got about 200 miles on the new combo, I'm going to try to drive it another 100 this week. Hoping to put down around 460-475 on the wheels. That should be close to 600 on the crank, not bad for an all motor car, with driveabilty. I just get frustrated with these little bugs and problems, but you have them on every project.
MnAiXsImMoA
03-28-2005, 04:32 PM
thats awsome man i would love to see the car sometime you should come to one of th meets
Feedman
03-29-2005, 09:29 AM
I just get frustrated with these little bugs and problems, but you have them on every project.
So true....
Good luck, let us know how it goes..... 8)
Don juan futon
03-29-2005, 02:52 PM
Tuned as far as what? Computer?
Naste95
03-29-2005, 04:59 PM
Tuning as far as the computer goes. Doing the fuel and timing curve, it just has a basic program in a Diablo chip. Also doing big axles and eaton posi.
Don juan futon
03-29-2005, 05:42 PM
What gears?
Feedman
03-29-2005, 09:27 PM
Tuning as far as the computer goes. Doing the fuel and timing curve, it just has a basic program in a Diablo chip. Also doing big axles and eaton posi.
What is the engine manegment system called, or does the stock ecu have an eeprom for chips?
8)
Naste95
04-02-2005, 05:58 PM
The results are in, it made 453.8 rwhp@6100rpm and 450.3 rwtq@4900rpm. Calculating drivetrain loss thats about 545 crank horsepower. I used a Diablo Revolution programmable chip. We keep the 3:73 rear gear. The tuner said I should gain another 15-20 hp after I get some miles on the new engine, that should make it 465-475 on the wheels.
Feedman
04-02-2005, 06:43 PM
Congrats man...thats some serious powa....
We need to take them to the track..... --8)
Davis Silver Sti
04-02-2005, 08:23 PM
The results are in, it made 453.8 rwhp@6100rpm and 450.3 rwtq@4900rpm. Calculating drivetrain loss thats about 545 crank horsepower. I used a Diablo Revolution programmable chip. We keep the 3:73 rear gear. The tuner said I should gain another 15-20 hp after I get some miles on the new engine, that should make it 465-475 on the wheels.
that's bloddy awesome! WEll done! Woooo!
The results are in, it made 453.8 rwhp@6100rpm and 450.3 rwtq@4900rpm. Calculating drivetrain loss thats about 545 crank horsepower. I used a Diablo Revolution programmable chip. We keep the 3:73 rear gear. The tuner said I should gain another 15-20 hp after I get some miles on the new engine, that should make it 465-475 on the wheels.
wicked
red93hatch
04-03-2005, 08:27 AM
Hey Johnathan ? is that still as much as Ryan's black cobra hang on let me ask my supervisor waiting...waiting....waiting. wait whats that hes giving me a no. Only joking man still some MaZZiVe PoWeR Yo. Sweet numbers cant wait till its nice enough for you to bring it out. good luck and hope it dont break. :wink:
ben2000formula
04-03-2005, 11:24 PM
ultra awesome numbers but srt-4's might still take you :roll: just kidding great power, hope to see the car in person this summer
red93hatch
04-04-2005, 05:38 PM
^^^AHAHAHAHAHA yeah cause they have MaD TyTe PoWeR Yo. Anyways I rode in the stang yesterday I must say that, that is probley one of (if not) the fastest cars I have rode defiently throws you back in your seat like no ones business Its wild. :lol:
ben2000formula
04-04-2005, 08:29 PM
i hope after my cam i pick up a big difference, hoping to hit 400whp on cam alone, plus bolt-ons
Toomster
04-04-2005, 09:43 PM
i hope after my cam i pick up a big difference, hoping to hit 400whp on cam alone, plus bolt-ons
You should take it the dyno :thumbup: SAE
Feedman
04-05-2005, 09:10 AM
Btw....Naste...where did you take it to have it tuned?
8)
Naste95
04-06-2005, 10:29 AM
400RWHP with a cam in a LS1 car and bolt on's is going to be pretty hard, maybe throw some afr heads and a LS6 intake, then maybe.
I got the car tuned at Delk Performance in lebannon Tenn. , they build the engine and the program for the chip.
Thanx red93hatch, I think you dad was even impressed!
ben2000formula
04-06-2005, 01:47 PM
i don't know people with the t-rex cam have put down 451 rwhp, i have an ls6 intake plus just about every bolt on possible.
http://www.thunderracing.com/catalog/?action=vshop&vid=3&pcid=51
click on t-rex v.2 dyno performance
so they did good then i might go to them
jchouse
04-06-2005, 04:05 PM
i don't know people with the t-rex cam have put down 451 rwhp, i have an ls6 intake plus just about every bolt on possible.
http://www.thunderracing.com/catalog/?action=vshop&vid=3&pcid=51
click on t-rex v.2 dyno performance
so they did good then i might go to them
damn a 110 lsa, want your car to idle rough or what. That will be cool :D
ben2000formula
04-06-2005, 10:23 PM
yeah i know thunder racing has some great prices on camshaft kits, your choice of cam, dual valve springs, retainers and seals for 780 dollars, installed and tuned for 1100 was the quote that i got, not that bad of a price
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.