Good Example of Ls/Vtec

[Feedman]

This is brokenlimits car...

http://forums.clubsi.com/showflat.php?Cat=&Board=UBB16&Number=4358389&page=0&view=collapsed&sb=5&o=&fpart=1

Follow the linky.... 8)

[xjoewhitex]

yea... very nice setup.. 8)

[blackek]

if it is the same guy i am thinking of corey at slowmotion (guy that did my motor) put that motor together. it is BAD A$$. the car is pretty clean to.

[xjoewhitex]

if it is the same guy i am thinking of corey at slowmotion (guy that did my motor) put that motor together. it is BAD A$$. the car is pretty clean to.

actually man.. hes on the site. :wink:

[Feedman]

if it is the same guy i am thinking of corey at slowmotion (guy that did my motor) put that motor together. it is BAD A$$. the car is pretty clean to.

Probably. He lives in Columbus. Nice guy. Good base to build on, thats for sure.... 8)

[blackek]

this site?

[Feedman]

this site?

Yep he wondered over from ohiohondas and clubsi

His s/n is brokenlimits ---> http://www.movfast.com/forums/viewtopic.php?t=198 8)

[blackek]

yes that is the same car i saw his block was messed up. i saw it. the rest of his piston and stuff was in the oil pan.

[Feedman]

yes that is the same car i saw his block was messed up. i saw it. the rest of his piston and stuff was in the oil pan.


Yep its definatly him then....here is a post on clubsi about his car...

http://forums.clubsi.com/showflat.php?Cat=&Board=UBB2&Number=4270886&page=0&view=collapsed&sb=5&o=&fpart=1

8)

[ben2000formula]

suprised he only got 170 at the wheels with a 12.5 to 1 compression

[ramrod]

hey ben could you explain qat 12.5:1 cmpression ratio means. I have an idea of what it is but im not really sure. Myt undersanding of it is 12.5 molecules of air for every 1 cubic inch or inch of cyclinder space?

[Feedman]

hey ben could you explain qat 12.5:1 cmpression ratio means. I have an idea of what it is but im not really sure. Myt undersanding of it is 12.5 molecules of air for every 1 cubic inch or inch of cyclinder space?

http://www.Google.com is your friend...but a good question....




Taken from http://www.dictionary.com

compression ratio
n.
In an internal combustion engine, the ratio of the maximum to the minimum volume within the cylinder, between the piston and cylinder head.




This was taken from our "little dictionary here in the powerplants forum"

Compression ratio. The ratio of the volume of the charge in the engine cylinder at the beginning of the compression stroke to that at the end of the stroke.




Here is a link that maybe can explain it better than I can...


http://e30m3performance.com/myths/more_myths1/comp_ratio/comp_ratio.htm

Hope that helps.... 8)

[ramrod]

Thanks :-)

[blackek]

he only had 170 at the wheels because he only had a ITR header and i think type r cams. but i think he got some skunk 2 stage 2's in. so that should kick it up a bit