Need a little help from the Mustang guys..

[m pwrd 3]

I have been installing some aftermarket parts on a 2003 Mustang GT. Everything has been going smoothly until I tried to get the H pipe disconnected from the passenger side manifold. I have tried many different methods but cannot seem to get a socket or anything else for that matter on there. I have just one nut left that needs to come off(the inner one). I am sure there have been some people on here that have taken them off, any advise would be great.

Thanks

[Jay]

Use a swivel.

[m pwrd 3]

I have used both a knuckle and a wobble extension. I have even cut down a deep well socket trying to get a better angle. Its just at such a odd angle I just cant get a good bite.

[daveb91]

Cut off wheel FTW!!!!!! Came in handy with the TA..

[m pwrd 3]

If this were my vehicle it would have already been cut off. Being that it is not mine I cannot do it.

[Jay]

Take the motor mount bolts out and jack up the motor.

[Stang420]

I used a swivel and a couple extensions when we took the exhaust off my cousin's 2000 GT.