PDA

View Full Version : Heads on the way


Jay
07-01-2008, 09:57 AM
Well, after buying, then selling a set of GT40P's, I am back to having another set..
I sold my first set in light of going TT with the car, and you cant get TT headers that will fit the P heads.

I have now decided to build it n/a and bolt on about 150hp of Nitrous.

They have been ported already, so that saves me money off the bat.
They have Trick Flow valve springs installed, and a 3 angle valve job.

I know there is better heads out there, but for $300 I couldnt pass on it.
Im still running the stock, shitty headers, so I needed to buy a set anyhow. The P's require a different header, so really, that doesnt effect me any since I need them anyhow. I am thinking about BBK long tubes instead of the shorty's.

These heads should work w/my cam rather nicely.
Now I just need to settle on a set of injectors/intake.

Not real sure how well the ported P's flow vs stock. But I do know there's a large "hump" in the exhaust port which ppl always get rid of w/porting job.
Here's a comparison chart..

http://i66.photobucket.com/albums/h251/jayxsoprano/headcompare.gif

daveb91
07-01-2008, 06:33 PM
Definately a upgrade should open it up on the top end with a good complete exhaust. Did you look into the Trickflow track heat stuff???

Jay
07-01-2008, 06:48 PM
Definately a upgrade should open it up on the top end with a good complete exhaust. Did you look into the Trickflow track heat stuff???

Haha yea right now I have 2 1/2" w/dumps.

That new Track Heat intake is terrible unless you are running a balls out motor.
One of the mag's tested it on their stroker 347 and still lost power.
It's mainly for boosted and very high rpm applications.

I'll prob just run a ported gt40/cobra intake.
I can pick one up cheap, I know someone who has one lol.

I need to pick up a set of rockers too..

kmfdmk
07-01-2008, 08:10 PM
Nice to see someone else beefing up their cars!!

Jay
07-01-2008, 09:56 PM
Nice to see someone else beefing up their cars!!

lol I do it all the time, I just dont post it.

The WS6 has a full suspension, literally.
A moser rear end
Full exhaust
SLP rockers
Ported TB & MAF
Mail order tune
Bunch of other little stuff.

I had aftermarket TB & MAF but the damn thing wouldnt run right.
TB was a Summit brand, and the MAF was a Granatelli.

daveb91
07-02-2008, 04:59 PM
How did that Mail order tune go for ya. And who did yours??

Jay
07-03-2008, 02:37 PM
How did that Mail order tune go for ya. And who did yours??

pcm4less did it.
I bought one instead of having the exchange deal.
I sent it back to get re-done for the 3:73's and still havent gotten it back yet.

daveb91
07-03-2008, 05:23 PM
wait4me did a hell of a jobb on mine no complaints heard lots of good things about your place too.

Jay
07-12-2008, 02:03 PM
Finally..

http://i66.photobucket.com/albums/h251/jayxsoprano/gt40p.jpg

daveb91
07-12-2008, 05:15 PM
You have to do anything to them? Or are they ready to bolt on?

Jay
07-12-2008, 11:18 PM
You have to do anything to them? Or are they ready to bolt on?

They already have trikflow springs, all they need is rockers which I bought.
The stock e7's suck ass, so just changing the heads should be about a 40hp increase supposedly.

They have had the shit ported out of them, as well as larger valves.
Im going to have the Cobra/GT40 intake port matched.
I found a spacer that goes between the upper/lower that has NOS foggers in it, so I think im going to pick that up and transplant the kit from the T/A to the stang.

daveb91
07-12-2008, 11:54 PM
That ought to do it. Now bottom end???

Jay
07-12-2008, 11:59 PM
That ought to do it. Now bottom end???

Bottom end is already done..

It's been bored .30 and balanced w/e303 cam.
They just stuck the stock intake/heads on it, with some rediculous valve springs. I think theyre triple.

Jay
07-29-2008, 10:05 PM
Well, Im finally back in town and starting to gather pieces for this thing again..

This would be so much easier if I didnt have ADD
lol

daveb91
07-30-2008, 09:29 PM
Get on it man.

Jay
07-31-2008, 12:16 PM
Haha I know, I know.
I just keep changing my mind on the route I want to go w/it alot.

Jay
08-07-2008, 09:08 PM
Picked up a gt40 intake off of evilbay really cheap.
It'll do for now anyway..

It's been blasted/coated.


http://i66.photobucket.com/albums/h251/jayxsoprano/intake1.jpg

http://i66.photobucket.com/albums/h251/jayxsoprano/intake2.jpg

http://i66.photobucket.com/albums/h251/jayxsoprano/intake3.jpg

daveb91
08-08-2008, 06:37 PM
Good find man!! I tried to stop you the other day in Vienna you were driving the stang. I was coming off my street but I was too late to signal ya!!

Jay
08-08-2008, 10:24 PM
Good find man!! I tried to stop you the other day in Vienna you were driving the stang. I was coming off my street but I was too late to signal ya!!

Hard to tell..
I dont drive it very often.
I was prob going to Seans house.