Jay's 5.oh blog

[Jay]

Im droppin it off some time next week, and pretty much came to the conclusion I am gona let Danny do wtf ever he wants.

Going to use the heads/intake I have now w/the current cam.

I'll keep this thread updated.

[daveb91]

Come on aftermarket cam cost isnt bad...........

[Jay]

Come on aftermarket cam cost isnt bad...........


Already has an e303 in it.

[Jay]

Well I dug through all of my papers/receipts/crap I have on my desk..
My GT40P's came w/flow chart,


At .500 lift they are;
233 Intake
182 Exhaust


In comparison stock out of the box Twist Wedge heads at .500 lift are;
242 Intake
170 Exhaust

[Jay]

Ok after getting parts, getting wrong parts, returning parts, re-ordering dif parts, ect.
Here's the list so far..

BBK inner fender CAI
GT40 Intake - ported/matched
70mm TB
80mm MAF
24# injectors
GT40P heads - ported
Crane Energy 1.7 rockers
FRP e303 cam
FRP GT40P headers - Shortie's
Granatelli in-tank 190lph fuel pump

That should be enough to get it started lol
I need to pick up a Trickflow intake in the near future.

[daveb91]

That should wake it up.

[Jay]

That should wake it up.

Yea I am hoping.

[Jay]

Somewhere in the mix of ordering mass quantities of parts I forgot that I am going to need valve covers which clear my rockers.

While I was perusing for a set I came across a set of Polymer ones. Yes, like plastic!
Think I'll pass on those..
Found a couple nice set's of aluminum ones chrome plated.
Then there's the raw sheet metal ones..
Decisions decisions..

Im suprised some company like APC never made a set out of clear lexan.
Actually that would look kinda cool.. Hmm..

[daveb91]

Dont know if this is an option but like the LS heads do they make a spacer for the cover??

[Jay]

Dont know if this is an option but like the LS heads do they make a spacer for the cover??


Yea BBK makes a spacer, but I just assume buy covers.
I think it's like $100 for the spacers?
Thats about what a complete set of covers cost

[InterceptorXR7]

GM used plastic valve covers on their v6's in the 90's until they were recalled and aluminum ones replaced them. Get some aluminum ford racing ones!

http://www.powdercoatingit.com/Cobracover22.JPG

[Jay]

Actually I was looking at a set identicle to those ones.

[Jay]

But I bought these instead..

Thick flanges on them. Shouldnt have any sealing probs.
Im pretty impressed w/the look.

http://i10.ebayimg.com/04/i/000/9a/95/b3b2_1_sbl.JPG

http://i17.ebayimg.com/04/i/08/ba/ba/02_1_sbl.JPG

[keesor]

I think those are the exact ones I have. Nice pieces. I had to remove the baffles in them to get them to fit. I just took a redbull can and cut it to fit where the baffles screwed in and it works great and clears the rockers.

[Jay]

I think those are the exact ones I have. Nice pieces. I had to remove the baffles in them to get them to fit. I just took a redbull can and cut it to fit where the baffles screwed in and it works great and clears the rockers.

Hmm I really did not wana have to go that route.. lol
They told me this would clear rockers & girdles. *shrug*

I was just impressed w/the thickness of them. Plus they look pretty nice.

[keesor]

They may just look like mine. They may be tall enough to clear?

[Jay]

They may just look like mine. They may be tall enough to clear?

*shrug*
Guess we'll find out.

I really need to get this thing dropped off down there but I been busy as shit at work.

[Jay]

Well so far today I have ordered..

new radiator
pretty blue frp rad & heater hose kit
motor mounts
adj cable & quad
new o2's
pretty blue summit cap, button, & wires
teh almighty sparkplugs

damn money pit.. lol

Easier to do it right the 1st time tho.

[Jay]

Oh, and I ditched the #24's in light of #30's
Room to grow on.
I'm sure I'll find something to do w/the #24's and mas lol

[Jay]

Well,
A complete front to back suspension setup is on the way..
Along w/a few other good's.
Another day, another thousand fucking dollars spent..

[keesor]

Well,
A complete front to back suspension setup is on the way..
Along w/a few other good's.
Another day, another thousand fu#k dollars spent..

So what'd ya get?

[Jay]

Well,
A complete front to back suspension setup is on the way..
Along w/a few other good's.
Another day, another thousand fu#k dollars spent..

So what'd ya get?


Dood I dont even know.. lol
What did I NOT get would be the easier question.

I just keep buying more/new shit every day..
Stopped at Griff's yesterday and dropped off half a dozen mroe box's.. Matt just laughed and said it looked like xmas lol.

I had an idea of money I wanted to spent and goals to attain, and that envelope just kept getting pushed til it fell clear off of the table.
Really what it has come down to is put the $ and parts on it and keep it for a toy to take out and beat on.

Think I am gona swap the wheels/tires over to my vert and get some draglight's for this sucker next.

[daveb91]

Didnt I suggest that earlier and you said no way???

[Jay]

Didnt I suggest that earlier and you said no way???

lol yea but function is taking the #1 spot above form now.

[Jay]

A few box's..

[daveb91]

Its a good start lol!!!!!

[Jay]

lol hopefully it's the end.

[InterceptorXR7]

all you need now is a blow up doll and you will be set

[Jay]

all you need now is a blow up doll and you will be set


You think I dont have one already?!?

[InterceptorXR7]

Oh yeah there was that one time we got drunk off popov and cruised around with them hanging out the t-tops

[Jay]

Oh yeah there was that one time we got drunk off popov and cruised around with them hanging out the t-tops

Hahaha

[Jay]

Prob the next thing to be bought..
I found em' online for $130 a piece, with free shipping.


http://wheelsforless.com/images/are/135.jpg

[Jay]

Well add MSD 6AL box to this never ending list.. lol

[Jay]

..and add a billet timing chain cover

[daveb91]

Saw the beast sitting in griffs today..........

[Jay]

Saw the beast sitting in griffs today..........


Looks like an xmas present holder huh? lol

[black00gt]

just left griff's a little bit ago and i think jegs might have blown up in your trunk!

[Jay]

just left griff's a little bit ago and i think jegs might have blown up in your trunk!

lol yea it kinda looks like it huh.

I snagged a cool pic earlier..
black fox on the lift, mine beside it, dannys to the right, and a white one in plain sight.

[black00gt]

that white one looks pretty clean

[Jay]

that white one looks pretty clean

It's not too shabby. Reminds me of my old one.
It looked like a mustang chop shop the other night in that place lol.

[daveb91]

is that a white Z car?

[Jay]

is that a white Z car?

Yea, that's Butchers.
'74 260Z w/a cam, dual webers, ect. Not sure what all else is done to it.

[Jay]

..and add an electric fan w/thermo to the list.

[butcher]

jay, didnt know you bought this site. hell yeah, ill have to come back more often, nad put some better pics of my car up. who care about stangs. all the red necks have em

[slownotch]

butcher ur just jealous of all us rednecks lol

[Jay]

jay, didnt know you bought this site. hell yeah, ill have to come back more often, nad put some better pics of my car up. who care about stangs. all the red necks have em

Inst mine completely, I co-own it with a few ppl.

[Jay]

butcher ur just jealous of all us rednecks lol

I have yet to have my headlights on a mustang not work.. lol

That Z sounds flippin wicked. Has a v8 sound to it.
You need to go get that damn thing and go run the hell out of it.
Prob drop 50lbs off of it by washing it..

[butcher]

yeah hope to get it tuesday. my mom got a new house and im puttin tile in about half the house . been workin my ass off on it this week.

[Jay]

Tile sucks. Done it before, never doin it again..

You mean tuesday as in tomorrow? lol

[butcher]

picked up the z today drove it about 5miles and decided it needs wheels asap. what is the name of the place you got the wheels for the t/a.

[Jay]

picked up the z today drove it about 5miles and decided it needs wheels asap. what is the name of the place you got the wheels for the t/a.

Wheel Max, but they dont sell rims that will fit your car, I looked.

You may end up having to run adaptors or some shit.

[Jay]

http://i66.photobucket.com/albums/h251/jayxsoprano/motor1.jpg

[daveb91]

Is that your engine jay??

[Jay]

Yep
Looks sweet lol.

[Jay]

http://i66.photobucket.com/albums/h251/jayxsoprano/2008_10310007.jpg

http://i66.photobucket.com/albums/h251/jayxsoprano/2008_10310009.jpg

[Jay]

It's alive!

Danny fired it up yesterday. Sounds pretty damn wicked.

[daveb91]

Cant wait to hear it and ride in it.

[Jay]

Sounds pretty good minus the insane exhaust leak where the prev exhaust sucked.
I got a new h-pipe and starter tubes to go to the mufflers, then gone run turn-downs.

The intake being painted silver/blue just doesnt look too great w/the chrome valve covers.. So I picked up a couple lbs of chrome powdercoat lol. I also got matte black, and translucent candy blue which is used over chrome (wanted to see what it looked like).

[Jay]

These wheels are sick.
I wanted to get them for my car.. then I decided I just wana get a coupe instead lol.
This car is perfect minus I dont own it.


17x9.25 Rears with 275/40/17 MT 17x4 Fronts with Hooiser Racing 26x17

http://i137.photobucket.com/albums/q232/91svtcoupe/whitecoupeweld004.jpg
http://i137.photobucket.com/albums/q232/91svtcoupe/whitecoupeweld031.jpg
http://i137.photobucket.com/albums/q232/91svtcoupe/whitecoupeweld030-1.jpg

[daveb91]

Nice wheels. I like the thin spokes.

[Jay]

http://i66.photobucket.com/albums/h251/jayxsoprano/stang/2009_01020004.jpg

http://i66.photobucket.com/albums/h251/jayxsoprano/stang/2009_01020008.jpg

http://i66.photobucket.com/albums/h251/jayxsoprano/stang/2009_01020016.jpg

http://i66.photobucket.com/albums/h251/jayxsoprano/stang/2009_01020021.jpg

[daveb91]

Going with turn downs?? MMM flowmaster dual exhaust and a h pipe what no baller x pipe?? Either way should perform and as always sound good. What size pipe?

[Jay]

Going with turn downs?? MMM flowmaster dual exhaust and a h pipe what no baller x pipe?? Either way should perform and as always sound good. What size pipe?

X-Pipe's are raspy sounding.
I have turn downs I just cant find them lol.
2 1/2" piping.

I am still blowing black shit out of my nose from painting the underneath of it.

[daveb91]

Undercoat or paint?

[Jay]

Undercoat or paint?

Just paint, and a shitload of it.
I repainted the very bottom of the ground fx too, which you cant see unless it's on the lift.

[Jay]

http://i66.photobucket.com/albums/h251/jayxsoprano/stang/2009_01170036.jpg

[daveb91]

Lookin nice does it run?

[Jay]

Lookin nice does it run?

Uh yea lol

[daveb91]

Well then how good noob....

[Jay]

Well then how good noob....

Dono havent smoke tested it.
Danny took it out the other day.

[Jay]

Some pics w/real cam this time..

http://i66.photobucket.com/albums/h251/jayxsoprano/stang/2009_01190002.jpg

http://i66.photobucket.com/albums/h251/jayxsoprano/stang/2009_01190003.jpg

http://i66.photobucket.com/albums/h251/jayxsoprano/stang/2009_01190004.jpg

[Jay]

A pretty sucky video.. I'll take a better one tomm.

http://i66.photobucket.com/albums/h251/jayxsoprano/stang/th_2009_01190001.jpg (http://s66.photobucket.com/albums/h251/jayxsoprano/stang/?action=view&current=2009_01190001.flv)

[daveb91]

What you couldnt even blip the throttle ....WEAK!

[Jay]

Give me time lol

[kmetz]

what cam are you running?

[Jay]

what cam are you running?

E303 w/1.7 rockers

[kmetz]

sounds good

[kmetz]

saw the maroon car for sale on corral. how much you asking for it? selling the heads and stuff? a buddy of mine might be real interested.

[Jay]

saw the maroon car for sale on corral. how much you asking for it? selling the heads and stuff? a buddy of mine might be real interested.

Make offer

[Jay]

Well I got a 74 model 351 block,
Windsor sr. Heads with 202 valves and port work
Victor efi intake
Knife edged forged crank
Forged h beam rods
Still need to buy pistons and a cam

I'm havin jay allen at camshaft innovations custom make me one.

On3 is making my turbo kit. It comes with everything
76mm turbo, which should be enough to push the limits of the motor.

Still need injectors a maf and in line pump.

Everything is going to be balanced as I intend on boosting the shit outta this thing. I'm lookin for 800hp. Go big or go home!

[brummy]

Nice! Sounds like you'll have a sweet ride once it's all done. can't wait to see the finished product

[keesor]

Pretty cool Jay, I've been kind of thinking of getting a 351 too. It's somewhat cheaper than going the dart route, but I just haven't decided. The dart block would be stronger, but I sure as hell don't need anything over 700-800 HP for the street. lol

Your going to need more than an inline pump for that kind of HP too. I'd just look into a fuel cell and an external pump or something with braided AN lines to the front.

That thing ought to be a mean SOB!

[Jay]

Pretty cool Jay, I've been kind of thinking of getting a 351 too. It's somewhat cheaper than going the dart route, but I just haven't decided. The dart block would be stronger, but I sure as hell don't need anything over 700-800 HP for the street. lol

Your going to need more than an inline pump for that kind of HP too. I'd just look into a fuel cell and an external pump or something with braided AN lines to the front.

That thing ought to be a mean SOB!

External pump is what I was talking about.

351 is def the cheaper route vs a dart block. You have to figure in the cost of all the little things too though. I have seen numerous ppl putting down 800-1k hp on stock 351 blocks.

I think Mike is going to half fill the block too. It's all at his shop right now.

[daveb91]

Man thats sounds bad ass I mean BAD ASS!!!

[Jay]

I went TT.. here's one of them.

[daveb91]

Whats the specs on that bad boy.

[keesor]

So did you get a complete kit or are you piecing it together yourself?

[Jay]

I dont have the spec sheets here, theyre at Griffs.
Two t3/t4's

I got a complete kit, but the downpipes will need modification due to using the 351 block, as well as the cold side piping will need changed for my intake ect.

As soon as I get it all unboxed ect. I'll start mocking it all up, taking pics, and start a thread about it.

[daveb91]

Turbo brand??? Looks very nice.

[Jay]

Turbo brand??? Looks very nice.

You wouldn't believe it if I told you.. lol

Guess it's time to make my thread.